Transformers - Dark of the Moon

In this video, you will learn how to position a patient for a head examination. The head neck coil consists of the following components lever for release, upper and lower part. Before performing the examination, register the patient, fill in the required data, and select the program. The Select and Go display provides you further guidance for the different steps of positioning the patient. First, position the posterior part of the coil into the patient table. For this, use the slide connect rails. Ensure that the coil is correctly plugged in. Place the pad in the lower part of the coil. Pull the lever to release and remove the anterior part of the coil. Help the patient to get on the patient table and provide instructions on positioning and examination. Position the head of the patient in the posterior part of the coil. Ensure that the shoulders touch the coil base. Place the head as high as possible to enable the best positioning for a head examination. Lock the anterior part of the coil and if necessary, attach the mirror. If your patient needs more space inside the coil, you can remove the posture cushion. Position additional comfort pads under the elbows and legs to increase the patient's comfort during examination. Check again that you position the patient safely and provide the alarm ball. Finally, position the table into the bore at ISO center by using the Select and Go automatic positioning or the manual mode from the touch panel. When you use select and go always ensure to start from table in home position.

1/1/1967 Head Exam Position Patient MAGNETOM Free.Max SIEMENS . Healthineers Doe, Jane Table Position Home Spine Coil Name Date of Birth 134.48 lb Body Part Brai ane -Spine Brain Guidance: Head SIEMENS MAGNE MAGNETOM Fre ED MAGNETOM Free Head/Neck Coil Siemens Healthcare GmbH, 2021 Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved.